Job Search


   Back to Results

CMM Programmer - Houston, TX

Branch ID: 5052

Pay Rate/Salary: At least: $25.00

REQUIRED

  • Experienced CMM Programmer

  • Minimum of 3-5 years' experience and/or training; or equivalent combination of education and experience

  • Knowledge of ISO 9001 requirements

  • Knowledge and experience in the use of advanced quality inspection techniques

  • Working knowledge of Microsoft Word and Microsoft Excel..

  • Ability to work nightshift

DESIRED

  • Associate's Degree or equivalent from a two-year college or technical school

  • Proficient in Microsoft Office

  • Knowledge of ISO 17020 and ISO 17025

  • Knowledge in NDT methodologies

Please note: CMM type: Wenzel. Quality of shop: QC Lab. Experience needed with PC-DMIS- OPEN DMIS

Purpose

In this position, you will be required to comprehend specifications to determine testing/inspection procedures and equipment to be used. The candidate must be able to read dials or digital displays, compare results with specifications and record test/inspection data, confer with engineers, technicians and production personnel. Must be able to demonstrate the ability to perform dimensional checks and visual verifications of raw material, fasteners, fabricated and machined parts to acceptance criteria. Document and track non-conformance reports/material. Ability to work with minimal instruction and supervision.

Functions

ESSENTIAL

  • Responsible for performing inspections on materials, products, assemblies, sub-assemblies.

  • Ability to read drawings, comprehend specifications and tolerances, read dial indicators and digital gages, compare results with specifications and record test data, confer with engineers, technicians and production personnel as necessary.

  • Demonstrate advanced ability to perform dimensional checks and visual verifications of fabricated and machined parts to acceptance criteria.

  • Uses measurement, test equipment and functional gages to determine if product meets all stated requirements.

  • Validate the quality of machined and fabricated parts, and assemblies in terms of dimensional accuracy and visual verification according to acceptance criteria.

  • Ability to review data supplied with material and parts to acceptance criteria, such as: dimensional reports, traceability reports and certificates of conformity.

  • Liaise with suppliers as required to ensure good product, documentation and service quality is maintained.

  • Understand and adheres to requirements of Gage Calibration, and Measurement System Analysis (MSA).

  • Develop and maintain inspection plans per drawing requirements

  • Interpret inspection results

  • Assists more experienced technicians and professionals in technical tasks.

  • Performs technical work tasks requiring moderate technical experience.

  • Checks in with supervisors routinely, successfully completes task as requested, and begins to think independently about solutions for recurring problems in equipment handling.

  • Elevates issue when beyond scope of position.

  • Applies routine techniques and standards under moderate supervision.

  • Shows initiative and enthusiasm to solidify foundational understanding of the work area, gain exposure to related work areas, and reach out for new skills

  • Works under well-defined procedures and guidelines that require
    low levels of troubleshooting.

  • Mentors or gives technical guidance to junior inspectors and technicians.

  • Performs a range of tasks with autonomy and may act as a cross departmental technical lead.

  • Applies a range of techniques and standards autonomously.

  • Shall be utilized as subject matter expert in quality control techniques.

  • Displays advanced professional communication and interpersonal skills when exchanging information with peers and supervisors.

  • Often serves as a resource to others in the resolution of complex problems.

  • Ensure all existing working procedures, practices and systems are followed.

  • Ensure in date calibrated measuring equipment is used for performing inspection

  • Must have a thorough understanding of advanced measurement techniques, and a basic understanding of Statistical Process Control

  • Issues document, investigate, and track non conformances and inspection records in the following SmartSolve modules: Inspection Management, Non Conformance and Corrective Action/Preventive Action.

  • Shall be capable of completing inspections, such as: FAT, SIT, FAI, In-Process, Final, Receiving inspections

  • Work as a team member when performing or witnessing inspection and/or testing for internal and external customers, third parties, customer's inspectors, and engineering/manufacturing representative.

  • Assist in developing and improving quality system procedures, work instructions, flow charts and associated process improvements.

  • Uses safe material handling and preservation techniques, such as, operating a forklift and jib cranes, packing/preservation to prevent deterioration or damage.

  • Product identification responsibilities include verification and / or physical product marking for traceability

  • Support the customer satisfaction and loyalty processes.

  • Support the organization's drive towards excellence in Health and Safety performance.

  • Support includes but is not limited to participating in STOP observations, reporting HSE observations, attending HSE related meetings, supporting HSE improvement projects and any other related task deemed appropriate by the Manager.


Requirements:
Must be able to work the hours of 8pm-5am Monday-Friday.

About Staffmark

The Company supports affirmative action and equal employment opportunity. The Company will provide equal employment in employment practices to all applicants for employment. Employment decisions shall be made without regard to any protected characteristic such as, but not limited to, race, color, religion, gender, age, disability, national origin, ancestry, citizen status, gender identity, sexual orientation, marital status, status in regard to public assistance, disabled veterans, recently separated veterans, Armed Forces service medal veterans and other protected veterans, genetic information and other legally protected classes. Furthermore, the Company is an E-Verify employer. Information provided on this application will not be used for any discriminatory purposes. The Company complies with all applicable federal, state and local non-discrimination laws and regulations. The Company will provide reasonable accommodations in the application or interviewing process. If you need a reasonable accommodation in the application or interviewing process, please contact us.

Job ID:
98576

Branch ID/Name:
5052

Location:
Houston, TX

Category:
Manufacturing

Job Type:
Temp to Hire Position
Industry
Manufacturing

Posted:
4/09/2019

Apply for this Position

CMM Programmer

City, State or Zip Code: Houston, TX

Position Type: Temp to Hire Position

Date Posted: 4/09/2019